<!--begin-bvseo-questions-->
<!--begin-questions-->
<div id="bvseo-questionsSection">
<div class="bvseo-question-answer" data-questionid="4233506">
<h2 class="bvseo-question">
Milk frother shuts off quickly
</h2>
<div class="bvseo-question-detail">
</div>
<div class="bvseo-author">Asked by: Macmjs</div>
<div class="bvseo-answer" data-answerid="3119873">
Thank you for reaching out to Mr. Coffee&reg;. We are sorry to hear that the milk frother shuts off quickly. That is certainly not the experience we want you to have. Take note that your Mr. Coffee&reg; Cafe Barista has a 1-year limited warranty and we would love to provide you with proper troubleshooting steps for a possible fix. For us to do that, we'd kindly request that you contact us directly so we can determine the best resolution. Have a good day!
<div class="bvseo-author">Answered by: Mr Coffee Consumer Care</div>
<div class="bvseo-pubdate">Date published: 2023-03-22</div>
</div>
</div>
<div class="bvseo-question-answer" data-questionid="4231502">
<h2 class="bvseo-question">
I&rsquo;ve had this machine for about a week, and only two times that I&rsquo;ve tried using it have the latte and cappuccino lights turned on. The espresso light turns on every time. Is there a way to reset it?
</h2>
<div class="bvseo-question-detail">
</div>
<div class="bvseo-author">Asked by: Eliz123</div>
<div class="bvseo-answer" data-answerid="3117690">
Thank you for reaching out to Mr. Coffee&reg;. We are sorry to hear about your experience with the espresso maker not working properly. We will be glad to check for options to see how we can help you further. For a possible fix, please try the following. - Unplug it for 3-5 minutes to reset the unit - Try it on another outlet Your espresso maker has a 1 year warranty. If the above resolution will not work, please contact us directly or fill up the contact us link below. Have a great day! https://www.mrcoffee.com/support/contact-us
<div class="bvseo-author">Answered by: Mr Coffee Consumer Care</div>
<div class="bvseo-pubdate">Date published: 2023-03-16</div>
</div>
</div>
<div class="bvseo-question-answer" data-questionid="4228840">
<h2 class="bvseo-question">
What size screwdriver bit is needed to service the inside of the unit? There are uncommon Y shaped screws. After only 2 years of light use the unit nearly does not froth whatsoever on latte setting.
</h2>
<div class="bvseo-question-detail">
</div>
<div class="bvseo-author">Asked by: Joe Cr</div>
<div class="bvseo-answer" data-answerid="3116861">
Thank you for reaching out to&nbsp;Mr. Coffee&reg;.&nbsp;We are sorry to hear about your experience with espresso maker not working properly.&nbsp;We will be more than happy to assist you. For a possible fix, please try the following. - Unplug it for 3-5 minutes to reset the unit - Try it on another outlet If the above resolution will not work, please contact us directly to provide the best resolution. You may also fill out the contact us link below. Have a&nbsp;great day! https://www.mrcoffee.com/support/contact-us
<div class="bvseo-author">Answered by: Mr Coffee Consumer Care</div>
<div class="bvseo-pubdate">Date published: 2023-03-14</div>
</div>
</div>
<div class="bvseo-question-answer" data-questionid="4225363">
<h2 class="bvseo-question">
cafe barista water not hot enough
</h2>
<div class="bvseo-question-detail">
</div>
<div class="bvseo-author">Asked by: Lemo</div>
<div class="bvseo-answer" data-answerid="3113981">
Thank you for reaching out to Mr. Coffee&reg;. We are sorry to hear that the water on your espresso maker is not hot enough. That is certainly not the experience we want you to have. No worries, we are here to help. If the espresso is brewing cold, check the following: 1. Tamp the espresso grounds down a little more 2. Pre-warm the cup by rinsing with hot water 3. De-lime (clean) the espresso maker. Your coffee maker has a 1-year limited warranty. If this doesn't resolve your issue, we'd like to kindly request that you contact us directly or fill in the &quot;Contact us&quot; link provided below to help you get to the best resolution. Have a good day! https://www.mrcoffee.com/support/contact-us
<div class="bvseo-author">Answered by: MrCoffee consumercare</div>
<div class="bvseo-pubdate">Date published: 2023-03-12</div>
</div>
</div>
<div class="bvseo-question-answer" data-questionid="4221038">
<h2 class="bvseo-question">
Hello we just bought this Mr Coffee machine and we have primed it but can't get it to make more than a 1/4 cup on the Cappachino setting we are lost?
</h2>
<div class="bvseo-question-detail">
</div>
<div class="bvseo-author">Asked by: CoffeebeanUsa</div>
<div class="bvseo-answer" data-answerid="3111775">
Thank you for reaching out to&nbsp;Mr. Coffee&reg;. We value your continued support of our product and we are glad to assist you with your inquiry.&nbsp; Please contact us directly to gather the information needed and provide the best resolution&nbsp;on making&nbsp;Cappuccino. You may also fill up the contact us link below. https://www.mrcoffee.com/support/contact-us
<div class="bvseo-author">Answered by: Mr Coffee Consumer Care</div>
<div class="bvseo-pubdate">Date published: 2023-03-01</div>
</div>
</div>
<div class="bvseo-question-answer" data-questionid="4206731">
<h2 class="bvseo-question">
the milk is coming out cold
</h2>
<div class="bvseo-question-detail">
</div>
<div class="bvseo-author">Asked by: reynier</div>
<div class="bvseo-answer" data-answerid="3104247">
Thank you for reaching out to Mr. Coffee&reg;. We are sorry to hear that the milk is coming out cold. That is certainly not the experience we want you to have. No worries, we are here to help. The possible reason for this issue is that the espresso maker might be having a build-up of mineral deposits, which will affect the operation of the appliance. For a possible fix, we advise you to try the following: To Delime Water Reservoir: 1. Fill the reservoir with fresh, undiluted white household vinegar. 2. Allow the appliance to sit overnight with the vinegar solution in the water reservoir. 3. Discard vinegar by removing the reservoir and turning it upside down over the sink. 4. Rinse the water reservoir thoroughly with tap water by filling the tank half full with water and then pouring the water back out into the sink, repeating this step twice. To Delime Internal Parts: 1. Make sure you delime the inside of the water reservoir first by following the Deliming steps above. 2. Make sure to switch the on/off button to the off position and the power cord is disconnected from the electrical outlet. Fill the reservoir with undiluted white household vinegar. 3. Insert the porta-filter (with filter and no coffee) and place a large empty cup on top of the drip tray and under the porta-filter. 4. Plug the power cord into the electrical outlet. 5. Press the on/off button to switch the unit on, once the 2 control panel lights (Espresso heater and Steam heater) turn solid press the Automatic Espresso Button twice. The vinegar will start flowing through the unit and it will stop automatically. 6. Place a large empty cup (with at least 325 mL/ 11 fl. oz. capacity) under the frothed milk dispensing tube. Fill the milk reservoir with water and place it back on the unit. Turn the Froth Control Knob counterclockwise to the clean position then press the Clean button to activate the clean function. Let the cleaning cycle run until you no longer see any milk coming out of the tube, or let the cycle run until it stops automatically. 7. Repeat Steps 1 &ndash; 6 as necessary using only tap water to rinse any remaining traces of vinegar out of the machine. Your Mr. Coffee&reg; Cafe Barista has a 1-year limited warranty. If this doesn't resolve your issue, we'd kindly request that you contact us directly so we can determine the best resolution. Have a good day! https://www.mrcoffee.com/support/contact-us
<div class="bvseo-author">Answered by: Mr Coffee Consumer Care</div>
<div class="bvseo-pubdate">Date published: 2023-02-09</div>
</div>
</div>
<div class="bvseo-question-answer" data-questionid="4202964">
<h2 class="bvseo-question">
The cafe barista is not working correctly. It will start to make a latte by frothing a little bit and then go immediately to the coffee. If I request just froth it works fine. I have to just froth first and the do just coffee now. Cappuccino too
</h2>
<div class="bvseo-question-detail">
</div>
<div class="bvseo-author">Asked by: Beccalois</div>
<div class="bvseo-answer" data-answerid="3100760">
Thank you for reaching out to Mr. Coffee&reg;. We are sorry to hear that your cafe barista is not working correctly. That is certainly not the experience we want you to have. Take note that your Mr. Coffee&reg; Cafe Barista has a 1-year limited warranty and we would love to provide you with proper troubleshooting steps for a possible fix. For us to do that, we'd like to kindly request that you contact us directly so we can determine the best resolution. Have a good day! https://www.mrcoffee.com/support/contact-us
<div class="bvseo-author">Answered by: Mr Coffee Consumer Care</div>
<div class="bvseo-pubdate">Date published: 2023-01-31</div>
</div>
</div>
<div class="bvseo-question-answer" data-questionid="4201665">
<h2 class="bvseo-question">
I got this for Xmas, about a month ago. It has been working really well and I&rsquo;ve used it quite a bit. However, over the last 2 days, the amount of frothed milk coming out is minimal although the knob is turned up to max. I read the manual and I&rsquo;ve kept tk
</h2>
<div class="bvseo-question-detail">
</div>
<div class="bvseo-author">Asked by: Mags the tennispro</div>
<div class="bvseo-answer" data-answerid="3099965">
Thank you for reaching out to Mr. Coffee&reg;. We are sorry to hear that your espresso maker is not frothing properly. That is certainly not the experience we want you to have. No worries, we are here to help. You may check the troubleshooting steps below. An espresso maker may not produce steam for frothing milk for the following reasons: 1. The frothing tube isn't clean.&nbsp; Wipe with a damp cloth immediately after each use so the milk does not dry and clog the frothing tube. 2.&nbsp;The frothing tube is clogged. Remove the black frothing aid from the frothing tube. Clean the frothing tube by filling a frothing pitcher halfway with water, and run the steaming feature for twenty seconds. Insert a toothpick or paper clip into the hold of the frothing tube to clear any clogs. Fill pitcher with clean water and froth for an additional 30 seconds. 3. Check the water levels. Not enough water in the reservoir may cause the machine not to produce steam when frothing If the frothing tube is producing steam, but the milk is not frothing, try the following: 1. Always use fresh, cold milk.&nbsp; 1% or skim milk is best. 2.&nbsp;Use a stainless steel frothing pitcher. Try using a frothing pitcher and make sure the pitcher is cool before using. 3. Move the frothing pitcher slightly up and down while frothing. Your espresso maker has a 1-year limited warranty. If this doesn't resolve your issue, we'd like to kindly request that you contact us directly or fill in the &quot;Contact us&quot; link provided below to help you get to the best resolution. Have a good day! https://www.mrcoffee.com/support/contact-us
<div class="bvseo-author">Answered by: MrCoffee consumercare</div>
<div class="bvseo-pubdate">Date published: 2023-03-12</div>
</div>
</div>
</div>
<script type="text/javascript">
if (document.getElementById('bvseo-questionsSection')) {
document.getElementById('bvseo-questionsSection').style.display = 'none';
}
</script>
<!--end-questions-->
<!--begin-pagination-->
<ul id="bvseo-paginationSection">
<li class="bvseo-paginationItem"><a class="bvseo-paginationLink" href="https://www.mrcoffee.com/espresso-machines/semi-automatic/mr.-coffee-caf%C3%A9-barista/SP_339536.html?bvrrp=Main_Site-en_US/questions/product/2/SP_339536.htm">Mr. Coffee Cafe Barista Black & Silver Espresso, Latte, and Cappuccino Maker Questions - page 2</a></li>
</ul>
<!--end-pagination-->
<ul id="BVSEO_meta" style="display:none!important">
<li data-bvseo="bvDateModified">y_2023, m_3, d_29, h_22CST</li>
<li data-bvseo="ps">bvseo_bulk, prod_bvqa, vn_bulk_3.0.34</li>
<li data-bvseo="cp">cp_1, bvpage1</li>
<li data-bvseo="co">co_hasquestionsanswers, tq_402</li>
<li data-bvseo="cf">loc_en_US, sid_SP_339536, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]</li>
<li data-bvseo="diagnostics">clientName_mrcoffee-jcs</li>
</ul>
<!--end-bvseo-questions-->
<ul id="BVSEOSDK_meta" style="display: none !important;">
<li data-bvseo="sdk">bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0</li>
<li data-bvseo="sp_mt">CLOUD, getContent, 0ms</li>
<li data-bvseo="ct_st">questions, product</li>
</ul>